AVIATION CORROSION PRESERVATION
& VBCI SOLUTIONS

Advanced VBCI preservation for aircraft engines, systems,
avionics, and long-term storage.

1. AIRFRAME SYSTEMS, INTERNAL FLUIDS & PROPULSION PRESERVATION GUIDE

Vappro VBCI 850 Corrosion Preservation for Aircraft Internal Propulsion and Engine Gearboxes

Internal Propulsion & Gearboxes

• Assets Covered
Aircraft engines, Auxiliary Power Units (APU), and engine gearboxes.

• Main Threats
Internal uniform corrosion, bearing rust, and gear tooth degradation driven by atmospheric humidity cycling, moisture condensation, stagnant lubricants, and acidic oil residues.

• Recommended Vappro System
Vappro VBCI 850

• Preservation Objectives
Protect the crankcase, interior gears, bearing surfaces, shafts, and oil-wetted internal metal chambers.

Vappro VBCI Hydraulic Actuator and Flight Control Systems Corrosion Protection

Actuation & Fluid Hydrosystems

• Assets Covered
Hydraulic pumps, control valves, actuators, cylinders, and fluid reservoirs.

• Main Threats
Fluid oxidation, varnish sludge formation, internal seal pitting, and moisture condensation inside stagnant hydraulic circuits during long-term storage.

• Recommended Vappro System
Vappro VBCI 850
Vappro VBCI 852

• Preservation Objectives
Preserve hydraulic reservoirs, internal valve blocks, cylinders, and sealing actuators.

Vappro VBCI 851 Microbiologically Influenced Corrosion Protection for Aircraft Fuel Tanks

Fuel Delivery Infrastructure

• Assets Covered
Fuel tanks, internal lines, and fuel transfer pumps.

• Main Threats
Water-bottom corrosion and microbiologically influenced corrosion (MIC) stemming from fuel-water interfaces, condensation, and microbial contamination.

• Recommended Vappro System
Vappro VBCI 851

• Preservation Objectives
Protect internal fuel tank walls, lines, and transfer systems from microbial biofilms and moisture.

Vappro VBCI 868 Atmospheric Corrosion Shield for External Airframe Skins and Structural Cavities

External Airframe & Structural Skins

• Assets Covered
Main fuselage structures, external exposed skins, wing panels, structural cavities, and inaccessible internal spaces.

• Main Threats
Atmospheric corrosion, salt air deposition, and severe pitting driven by trapped environmental humidity, oxygen, and condensation film layers.

• Recommended Vappro System
Vappro VBCI 868
(Augmented with Vappro VBCI 823 or Vappro VBCI 851 for unventilated internal cavities).

• Preservation Objectives
Provide a rugged, hydrophobic chemical barrier across exposed skin boundaries and continuous vapor-phase molecular shields within voids.

Vappro VBCI Anti-Mold Spray and Moisture-Sorb for Aircraft Cabin Interior Sanitation

Habitation & Cabin Environment

• Assets Covered
Main aircraft cabin interiors, cockpit enclosures, and environmental control insulation spaces.

• Main Threats
Structural mold accumulation, fungal growth, and stagnant odors caused by trapped organic dust and moisture retention under restricted ventilation.

• Recommended Vappro System
Vappro VBCI AMS Anti-Mold Spray
Vappro VBCI Moisture-Sorb

• Preservation Objectives
Maintain a clean, sterile, and hygienically safe environment within internal flight and passenger areas.

2. AVIONICS, ELECTRICAL NETWORKS & LOGISTICS SPARES MATRIX

SYSTEM / STORAGE CATEGORYSPECIFIC AVIONICS & HARDWARE COVEREDPRIMARY DEGRADATION DRIVER & SCIENTIFIC CAUSERECOMMENDED VAPPRO DEPLOYMENTFUNCTIONAL OBJECTIVE
AVIONICS & ELECTRICAL NETWORKSAvionics bays, navigation systems, communications modules, control panels, terminals, wire connectors, circuit boards, and sensitive electronics.Contact oxidation, tarnishing, sulfidation, and electrochemical migration across fine trace lines driven by relative humidity (RH), condensation, and airborne salts.Vappro VBCI Emitters
(Add Vappro VBCI Moisture-Sorb inside sealed avionic storage boxes).

Protect highly conductive contact pins, terminals, and printed circuit board assemblies (PCBs) without leaving insulative or oily films.
LANDING GEAR & WEAR JOINTSLanding gear struts, structural wheel assemblies, pins, hinges, bolts, exposed threads, and sliding wear interfaces.Extreme atmospheric corrosion, severe pitting, crevice conditions, and thread binding accelerated by runway de-icing salts, de-icing fluids, moisture, and stagnant grease.Vappro VBCI 869
(Paired with Vappro VBCI 868 for structural framing elements).

Deliver contact corrosion inhibition and long-term anti-seizure thread protection to moving structural pins and bearings.


ELASTOMERIC WEATHERPROOFING

Structural rubber seals, window gaskets, fluid hoses, and environmental elastomeric parts.

Ozone cracking, polymer hardening, UV-driven heat aging, and rapid material oxidation.Vappro VBCI VBCI Rubberplast

Preserve critical elasticity, prevent cracking, and maintain long-term weather-stripping or fluid containment performance.
WAREHOUSE LOGISTICS & SPARES INVENTORY

Factory warehouse replacements, spare mechanical components, wrapped line items, and export shipping boxes.Localized surface oxidation and atmospheric shelf rust stemming from factory handling residues (fingerprints), dust, and storage climate variance.Vappro VBCI 826S Film + Vappro VBCI 823 Pouches
(Augmented with Vappro VBCI Moisture-Sorb for bulk moisture stabilization).
Establish a self-contained, long-term VBCI defensive microenvironment inside individual crates or barrier wrappers without needing thick coatings.
Showing 4 entries

3. MULTI-LAYER AVIATION PRESERVATION BLUEPRINT

A clean deployment sequence for protecting aircraft propulsion systems, fuel infrastructure, avionics, logistics spares, and structural hardware.

PRODUCT: Vappro VBCI 850
PURPOSE: Protect engines, APUs, gearboxes, hydraulic circuits, and oil-wetted chambers. 

PRODUCT: Vappro VBCI Emitters
PURPOSE: Prevent contact oxidation, sulfidation, and electronic signal degradation. 

PRODUCT: Vappro VBCI 869 and Vappro VBCI 868
PURPOSE: Protect threads, bearings, hinges, struts, and exposed structural joints. 

PRODUCT: Vappro VBCI 826 and Vappro VBCI 823
PURPOSE: Establish long-term VBCI protection inside packaging and storage crates. 

PRODUCT: Vappro VBCI Rubberplast
PURPOSE: Preserve elasticity, sealing performance, and resistance to UV degradation. 

Continue Exploring

← Previous: Electronic  Preservation All Case Studies & Success Stories Next: Automobile Production Preservation →
Vappro VBCI

Advanced vapour corrosion inhibitor solutions for industrial asset preservation and corrosion protection worldwide.

10H, Enterprise Road, Singapore 629834

(65) 6786-2616

info@vapprovbci.com

© Copyright 2024 Magna International Pte Ltd. All Rights Reserved.